Pig farming equipment stainless steel pig nipple drinker with high quality
From left to right: 1/2” size for piglet, 1/2” size for sow, 3/4” size for sow.
1/2” piglet | 1/2” sow | 3/4” sow | |
Length | 65mm | 75mm | 85mm |
Weight | 67g | 88g | 185g |
Thread diameter | 20mm | 20mm | 25mm |
Note: 1/2” size means the nipple drinker’s thread diameter is 20mm
3/4” size means the nipple drinker’s thread diameter is 25mm
How to choose nipple drinker?
Production Process:
Made by best 304 stainless steel, can guarantee no rust, will not produce pollutants, will not be blocked, have a longer service life
CNC machining, to ensure accuracy. So that the surface is smooth and stingless, to ensure pig's drinking water safety. Protection network settings to ensure that the nipple will not be clogged with sediment.
How to install nipple drinker?
1.The table in the diagram is for reference. Piglets can choose Type A when weight is 5-15kg, and Type B can be used when weight is above 15kg. Specific usage can be determined according to customer's requirement.
2.The installation height can be referred to the table. In general, the distance of the nipple from the ground, the piglets are 25 ~ 30cm, and the pig (3 ~ 6 months old) is 50 ~ 60cm, and the adult pig is 75 ~ 85cm. The height of the nipple should be higher (5~8cm) than the height of the minimum pig in the pigsty.It may also depend on the situation
3.Nipple and pigsty or wall angle of 45 ° ~ 70 °, to facilitate drinking pigs
2. pig drink bowl
The Material: 304 Stainless Steel
Kinds of sizes like the following:
Product Item | Model | Size(mm) | Material | Weight(g) |
Circle Water bowl | JCJX001 | Dia 175*135 | 304 stainless 1.0mm thickness | 510 |
JCJX002 | Dia 150*110 | 395 | ||
JCJX003 | Dia 130*80 | 330 | ||
Square Water bowl | JCJX004 | 295*220*140 | 1300 | |
JCJX005 | 265*180*130 | 960 | ||
JCJX006 | 210*150*110 | 560 |